EMT Practice Test

1. Question Content...

---

Question1: You want toreplicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault).
To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.
Which productwould accomplish this task?

Question2: You have a FAS9000 with 10 TBNL-SAS drives that is replicating to a FAS8200 with 4 TB NL-SAS drives. An 80 TB source volume on the FAS9000 is showing 50% storage efficiency. After that volume mirror is initialized, the FAS8200 destination volume is showing only 10% storage efficiency.
In this scenario, why is storage efficiency reduced after replication?

Question3: A customer is running multiple Oracle DBs over NFS. The volumes are replicated using SnapMirror to a secondary site, which also hosts the development and test systems. They want to streamline the creation of test environments on the secondary site so that they will not have to manually use FlexClone to clone multiple volumes for each request.
In this scenario, which tool satisfies these requirements?

Question4: Your customer is concerned that his volume might run out of space.
Which two volume command options would be used to resolve this problem? (Choose two.)

Question5: A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.
In this scenario, which statement is correct?

Question6: A customeris running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore - file-list.
Which two statements are true about this operation? (Choose two.)

Question7: Click the Exhibit button.

You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.
Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Referring to the exhibit, which statement is correct?

Question8: Click the Exhibit button.

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

Question9: Click the Exhibit button.

An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?

Question10: You have deployed IntelliSnap to list NetApp Snapshot copies in volumes on your ONTAP system, schedule new backups on unprotected volumes, and implement archiving to your remote AltaVault system.
Which additional NetApp product does IntelliSnap require to perform all of these actions?

Question11: Your customer is concerned that his volume might run out of space. Which two volume command options would be used to resolve this problem?
(Choose two.)

Question12: The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performed the steps to make the destination volume read/write accessible to the clients.
Which three actions should your considerdoing while the customer makes the necessary repairs to their data center? (Choose three.)

Question13: You are the administrator of an ONTAP cluster, where the majority of users are using Linux machines with home directories mounted using NFS. You keep six daily, four weekly, and one monthly Snapshot copy locally. However, you do not replicate the data to another instance of ONTAP. One of your users reports having accidentally deleted a file, but does not remember the self-serve restore procedure.
How does the user restore the file without having administrator privileges on the cluster?

Question14: You have successfully deployed a primary and a secondary ONTAP cluster. You want to set up an intercluster SnapMirror relationship between your primary and secondary sites.
In this scenario, which two actions are required before accomplishing this task? (Choose two.)

Question15: Click the Exhibit button.

You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.
Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?

Question16: Acompany has a 4-node FAS9000 fabric MetroCluster cluster separated by 101 km. Site A has an unmirrored HDD aggregate. An FC-VI card fails in one of the nodes in site A and a switchover occurs.
Which statement is correct in this scenario?

Question17: Click the Exhibit button.

Referring to the exhibit, which volume has the highest level of protection assigned to it?

Question18: Click the Exhibit button.

Using the NetApp Cloud TCO calculator, a customer wants to determine whether running Cloud Volumes ONTAP in Azure will be more costeffective than running native cloud services.
Referring to the exhibit, which action would satisfy the requirement?

Question19: Click the Exhibit button.

A customer is interested in using SnapCenter to support Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?

Question20: You are implementing version flexible SnapMirror in a clustered Data ONTAP environment.
Which type of SnapMirror policy would be used?

Question21: You are asked to protect your customer's Exchange environment. You deploy SnapCenter 4.1 and the plug-in for Microsoft Exchange Server. While creating the backup policy, you select the Full and Log Backup from the list of supported backup types.
In this scenario, what would the Full and Log Backup type allow you to protect within Exchange?

Question22: You want to set up an important management solution that must comply with FIPS 140-2. The solution should support a multi-clusters environment and should provide centralized management of the encryption keys.
In this scenario, which solution accomplishes the task?

Question23: A customer has a MetroCluster configuration and wants to automate the disaster recovery process for unplanned automatic switchover.
Which NetApp tool would accomplish this task?

Question24: You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?

Question25: You are given the vsadmin account credentials for an SVM that is delegated to you by your organization's shared services group. You are asked to verify that all of the volumes in your SVM are protected with SnapMirror.
In this scenario, what would you use to accomplish this task?

Question26: A client has a VMware vSphere environment with several MS SQLservers currently running that provides back-end Web services. You are asked to prepare a disaster recovery solution that would minimize downtime if any of these virtual machines become corrupted and unavailable.
Which solution will satisfy the requirement?

Question27: A customer is planning the cloud strategy for their Microsoft SQL databases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.
In this scenario, which two products are required to satisfy their backup management needs? (Choose two.)

Question28: You have multiple load-sharing destinations for a volume in a storage virtual machine. The source volume has become unavailable and you want to make one of the destination volumes the new source.
What happens to the original source volume?

Question29: A company wants to implement a hybrid cloud backup model for their file services. They want to configure an incremental forever backup that can then push to a public or private cloud.
Which products satisfy this requirement?

Question30: Which two NetApp technologies allow for synchronous replication of data between two remote sites? (Choose two.)

Question31: A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.
In this scenario, how much data is transferred when the SnapMirror relationship is initialized?

Question32: You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get thenode booted up again, but are unable to perform the giveback operation. The onscreen error is:
"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks" What are two ways to solve this problem? (Choose two.)

Question33: Your manager requires you to protect a production SVM called svm01 by using SVM-DR. Your manager insiststhat all configuration and data LUNs be replicated to the DR cluster. The destination SVM should be called drsvm01. You set up an SVM-DR relationship between the clusters, specifying that the - identity- preserve option is set to true. After the initial replication completes, you discover that the iSCSI LIF configuration has not been replicated to drsvm01.
What should you do to solve this problem?

Question34: You have downloaded a user-created OnCommandWorkFlow Automation (WFA) content pack from the NetApp communities Web site and wantto import it into your environment.
Which two statements are true in this scenario? (Choose two.)

Question35: You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.
Which two statementsare correct about enabling this feature? (Choose two.)

Question36: You recently set up a SnapMirror relationship with a daily update schedule. You want to verify that the updates are being performed daily.
Which two actions inside OnCommand System Manager would you ensure that the SnapMirror transfers are occurring daily? (Choose two.)

Question37: A customer wants to convert some SnapMirror relationships to SnapVault relationships.
How would this be accomplished without creating a new baseline?

Question38: You are copying your data and replicating it off site. What is the called?

Question39: You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection -> Volume Relationships.
In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?

Question40: You have a VMware VSphere environment with SRM and NetApp SRA fully configured.
Which twostatements are true? (Choose two.)

Question41: You are asked to provision some new storage for VMware. Which two tools are available to perform this task?(Choose two.)

Question42: You want to have a NetApp FlexVol that can both grow and shrink dynamically as required by current capacity needs.
Which settings will enable this feature?

Question43: How are the FC-VI links cabled in MetroCluster for ONTAP?

Question44: You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial data. Although the data is critical, it only changes on a monthly basis.
Using OnCommand System Manager, which two actions would change the frequency of the SnapMirror updates? (Choose two.)

Question45: You want to perform a health check of the MetroCluster synchronization status.
Which two actions should you perform? (Choose two.)

Question46: You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.
In this scenario, which two statements are true? (Choose two.)

Question47: An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.
In this scenario, which two actions must you take to make the volume writable again? (Choose two.)

Question48: Which two statements describe a Snapshot copy prefix? (Choose two.)

Question49: You want to modify the existing Snapshot copy schedule to allow for more granularity in your ability to recover data after a corruption or loss.
In this scenario, which two tools allow you to accomplish this task (Choose two.)

Question50: Click the Exhibit button.

A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m.
They have a network connection between two sites thatprovides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?

Question51: Click the Exhibit button.

You are asked to set up aSnapMirror relationship to protect some Oracle DB volumes on both nodes of the aff-01 and aff-02 clusters. You are using the 1 Gb network and the other nodes all have free space to support the mirror.
Referring to the exhibit, which two nodes would provide the least network transfer time for the relationship?
(Choose two.)

Question52: What are two reasons why thestatus of the SnapMirror relationship is showing ~Healthy: false~? (Choose two.)

Question53: You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.
In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)

Question54: You want to configure peering between two existing ONTAP HA clusters.
In this scenario, which three steps would you perform to accomplish this task? (Choose three.)

Question55: Click the Exhibit button.

Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?

Question56: Click the Exhibit button.

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

Question57: Your customer has issued the metrocluster heal command.
Which two statements are true regarding this command? (Choose two.)

Question58: You have a network outage that affects client access to site A.
You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
Which two steps must you perform first? (Choose two.)

Question59: You are calculating transfer timefor SnapMirror replication between two NetApp clusters.
Which three factors should be included in your consideration? (Choose three.)

Question60: Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do tocreate the SnapMirror relationship?

Question61: You have deployed a MetroCluster IP disaster recovery solution for cross-site protection and business continuity operations.
In this scenario, whichtwo statements are correct? (Choose two.)

Question62: You need to restore a file from yesterday's backup. You know that a Snapshot copy is in place on the volume where the data is stored. Other users are notcomplaining about lost or corrupt data on the volume.
All users are running Windows 7 on desktop computers.
How would you recover the file quickly without disrupting other users' data?

Question63: After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)

Question64: A customer wants to set up SNMP to monitor their ONTAP platforms. Because of security reasons, they need strong authentication and data encryption?
In this scenario, which SNMP version satisfies these requirements?

Question65: You are creating daily SnapVault backups of a NAS volume that contains the data for your business critical application. You discover that corruption began two weeks ago on the data on that volume.
In this scenario, which statement is true?

Question66: Click the Exhibit button.

You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?

Question67: Which technology uses synchronous replication?

Question68: A customer's infrastructure consists of multiple ONTAP clusters, both physical and virtual. The clusters replicate some data with each other. You want to generate a comprehensive report of all the replication that is present on the infrastructure.
In this scenario, which tool accomplishes this task?

Question69: You want to use a Fabric Pool to store destination SnapMirror data to an external capacity tier. Which tiering policy would be used inthis scenario?

Question70: What is a NetApp Snapshot copy?

Question71: Click the Exhibit button.

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window.
Referring to the exhibit, which step should be performed next to test the recovery workflow?

Question72: You notice that after you delete data from your FlexVol volume, some Snapshot copies have also been deleted. Snapshot auto delete is enabled.
Which volume autosize mode must be enabled for this behavior to occur?

Question73: The customer wants to set up a disaster-recovery relationship between the NetApp SolidFire cluster and the NetApp FAS cluster.
Which two statements are true in this scenario? (Choose two.)

Question74: Click the Exhibit button.

You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?

Question75: Click the Exhibit button.

Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?

Question76: Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do to create the SnapMirror relationship?

Question77: What are three prerequisites for replicating an Element OS volume to ONTAP? (Choose three.)

Question78: You are asked to size an ONTAP disaster recovery and backup cluster. You are required to use 4 x 40 Gb Ethernet ports per controller and 4 x 32 Gb FC ports per controller. You also need to confirm support for Commvault IntelliSnap for NetApp v11.
Inthis scenario, which two tools would confirm these requirements? (Choose two.)

Question79: Which product delivers application-consistent recovery across local and remote sites?

Question80: Click the Exhibit button.

A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protectionsection, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.
Referring to the exhibit, which volume has a lag that exceeds the company policy?

Question81: Click the Exhibit button.

You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?

Question82: Click the Exhibit button.

An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?

Question83: You want to set up protection relationships at the time of provisioning one or more primary volumes in the source cluster in ONTAP.
Which NetApp management tool enables you to accomplish this task?

Question84: Click the Exhibit button.

You have been receiving the lag status error notifications shown in the exhibit.
What must you do to correctthis problem?

Question85: An administrator wants to use SnapCenter 4.1 to back up and restore both their VMware Horizon environment and Microsoft SQL attached database.
In this scenario, which service account role should be configured to accomplish this task?

Question86: You have experienced a disaster at your source site and activated SVM DR. The source site is now up, but your source SVMs no longer exist. You must restore data to the original source and maintain the SVM DR configuration.
Which two steps must be taken to accomplish this task? (Choose two.)

Question87: You want to ensure that a particular version of SnapManager for SQL is supported in a configuration.
Which three components need to be verified in the Interoperability Matrix? (Choose three.)

Question88: You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation. Which tool would accomplish this task?

Question89: Your customer wants to implement SVM DR, but the customer is not certain whether the identity-preserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.
In this scenario, which SVM DR solution should the customer use?

Question90: Which clustered Data ONTAP technology replicates only the changed blocks of a volume for pointin- time restores?

Question91: Click the Exhibit button.

You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?

Question92: Exhibit:

You are configuring a SnapMirror relationship to capture all daily activities and archive them.
Information about the environment is shown in the exhibit.
In this scenario, how much data must be transferred during the scheduled SnapMirror update?

Question93: Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

Question94: Your customer wants to implement a mirroring solution between two NetApp controllers.
Which solution would you recommend tothe customer?

Question95: In a MetroCluster IP configuration, which two network portsmust be connected to dedicated switches? (Choose two.)

Question96: You have deployed the DP_Optimized (DPO) license on the destination cluster to support a high number of volumes and peer relationships for setting up data protection with multiple sourceclusters. You want to obtain a list of unprotected volumes on the source cluster and protect them.
Which two management tools would be used to accomplish this task? (Choose two.)

Question97: Click the Exhibit button.

You have a SnapProtect v11 environment as shown in the exhibit. What are the two default Snapshot copies created automatically after creating a Storage Policy.
(Choose two.)

Question98: You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.
Which two solutions satisfy this requirement? (Choose two.)

Question99: Click the Exhibit button on the right.

You have an AFF A300 controller with four volumes in the aggregate that is shown in the exhibit. You replicate all four volumes to one aggregate on a FAS8200 controller in a different cluster.
Referring to the exhibit, what are the storage efficiency savings on the destination FAS8200?

Question100: You are asked to perform a NetApp Snapshot copy single-file restore on a corrupted thin-provisioned LUN that is 10 GB in size and is currently at 80% full.
How much additionalfree space do you need in the volume to perform this operation?

Question101: Click the Exhibit button.

You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?

Question102: Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

Question103: A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.
In this scenario, what would you do to reestablish the storage failover capability on your cluster?